MST-1000 MST1000 MASTER Automobile Motor Igniting Signal Tool

在庫あり。 歴史: 23 販売。 商品番号 AD59

現価: 15,620
エクスプレス配送サービス    配送時間:3-5営業日.詳細?
26cm*17cm*9cm     ( Inch: 10.24*6.69*3.54 )
7日以内に返品できますが、ただお客様は運賃を払います。 詳細?


MST-1000 MST1000 MASTER Automobile Motor Igniting Signal Tool
MST-1000 Split-free, wire-free, contact-free, probe close to the high-voltage wire to directly detect ignition signal.
Measure the ignition timing on the ignition signal (MS).
Measure the voltage on the ignition signal (KV).
Measure engine RPM.
MST-1000 MST1000 MASTER Automobile Motor Igniting Signal Tool 

Top 6 Reasons to Buy MST-1000:
1. Capacitive pick-up,Flexible probe

2. Secondary Function/Capture button

3. Protective rubber holster,LCD display

4. Power ON/OFF/RESET button,Engine Cycles button

5.Ignition system button

6. Main Function/Calibrate button

Automobile Motor Igniting Signal Tool MST-1000 Functions:

1. Minimum and Maximum functions (for COP and SPW modes)
The MST-1000 maintains a continuous record of the minimum and maximum readings of the function currently selected.
To display the Minimum and Maximum readings of the main display, if not already selected press ' secondary function / capture ' button  momentarily.
To reset the Minimum and Maximum readings, press the ' power on /off/ reset ' button momentarily. These values are also reset when turning the unit on.
Note: For the tachomenter function ( RPM) all Minimum and Maximum reading on the secondary displays are shown with the last digit rounded to '0'.
2. Spark Kvolt calibration function ( for COP mode only)
The MST-1000 requires the user to calibrate the instrument in order to measure spark Kvolt in coil on plug and coil near plug ignition systems. This calibration uses the measurement values obtained during the procedure to find the optimal measuring parameters or a particular type of ignition module , and compensates for differences in wave form and signal strength.
Once the MST-1000 has been calibrated on one of the ignition modules of the engine being diagnosed, all the subsequent measurement of spark Kvolt will be relative to the calibration value.
To calibrate  the MST-1000, follow the procedure as described in ' 3.4.2 Measureing coil on plug and coil near plug ignition systems '.

MST1000 Package including:
1pc x The host
1pc x Color box
1pc x The cloth
1pc x The battery
1pc x CD

何か質問があれば、 お気軽にお知らせください。
Live Support:

Attention: please leave your telephone number for shipping arrival when you make payment for this product on our website.