Yanhua Mini ACDP programming master Module 6 MQB/MMC V-A-G MQB/MMC Odometer Correction

Yanhua Mini ACDP Programming Tool Workable car models:

Supports parts of VAG MQB platform VDO cluster odometer correction by OBD
Supports 2015 up Passat MMC (NEC D70F3525 + 95320) cluster mileage correction by ICP.

 

IOS iPhone 

IOS computer

PC 

Android phone with the Qualcomm chip 

Note: The Huawei device doesn't work for the tool.

Item Number	Module	Function
SK247	ACDP Programmer Basic Module	93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP), Onboard programming (OBP) and parts of Freescale / NEC MCU in circuit programming(ICP); This module is a necessary basic configuration for other modules;
SK247-1	CAS Module	CAS1 – CAS3+: IMMO key programming by OBD or ICP mode, Mileage reset, Read/Write EEPROM and FLASH data; CAS4/CAS4+: IMMO key programming in circuit programming (ICP), Mileage reset, Read/Write EEPROM and FLASH data;
SK247-2	FEM/BDC Module	FEM/BDC: IMMO key programming by ICP or OBP mode, Mileage reset, Recover/Backup data;
SK247-3	ISN Module	N20/N55/N13: Read/write ISN codes via OBD; MSV80/MSD85: Read/write ISN codes without opening DME shell; Other DME types: Read/write ISN codes by opening DME shell;
SK247-4	35160 Module	080DOWQ/T,160DOWQ/T EEPROM: erase or adjust mileages;
SK247-5	Fujitsu CPU MB91F Module	Fujitsu CPU MB91F (Honda Fit, KIA K3/K5, Sonata 9, etc.): Mileage adjustment;
SK247-6	MQB/MMC Instrument	VW MQB platform: parts of VDO mileage adjustment via OBD; Passat MMC (NEC D70F3525 + 95320) instrument: mileage adjustment for models after 2015 by ICP mode;
SK247-7	Refresh BMW key	BMW E chassis/F chassis: Refresh keys to make BMW keys can be used repeatedly;
SK247-8	FRM module (FRM Footwell module)	BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH: Read and write data; 3M25J chip EEPROM/D-FLASH/P-FLASH: Read and write data;

1. Overturn the traditional work mode - Single operation is changed to team cooperation

2. Change the operation mode - PC operation is changed to mobile phone operation

3. Change the test connection mode - Electric soldering iron is changed to no-solder dedicated connector

4. Changed from artificial observation to intelligent monitoring Artificial observation / trying is changed to automatic detection algorithm, grap hical in dication the relability of connection. Ensure the data is not damayed and lost

5. Change the service mode - Offline service is changed to online synchronous service

 

IMMO/Mileage Programming

No need to remove chip

No need soldering

No need to cut the line
No need to lift the pin
 

Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).

 

(1) Support cas1-cas4+ and FEM/BDC IMMO key programming, mileage reset, program recovery.

(2) BMW engine ECU data reading and ISN code reading

 

3. VW module programming: MMC instrument

5. BENZ. BMW Audi and various models are upgraded successively

Install ACDP App from App Store.



Package includes:

1pc x VW Passat MMC instrument interface board