Launch X431 X-PROG 3 Immobilizer & Key Programmer XPROG3 チップリーダー X431 V、X431 V +、X431 PAD V、PADVIIの場合
現価: 79,847円
運送:
無料配送
エクスプレス配送サービス配送時間：12-25営業日.詳細»
重量:
4.8KG
規格:
42.2cm*35.4cm*12.3cm
( Inch: 16.61*13.94*4.84 )
返品:
7日以内に返品できますが、ただお客様は運賃を払います。 詳細?
製品説明
LAUNCH X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Launch X431 X-PROG 3 Immobilizer & Key Programmer
Highlights:
1. All-in-One Key Programmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
3. Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
4. Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
5. Enables Reading/ Writing EEPROM, On-Board MCU, and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Advantages
1. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).
Supported Brands
VW, Audi, Skoda, SEAT, BMW, Mercedes-Benz, Toyota… (updates to be continue)
Compatible With Multiple X-431 Series Diagnostic Tablet:
X431-Throttle, X431-Throttle III, X431-Torque, X431-Torque III, X431-Turbo, X431-PAD II AE
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
X-PROG3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
2. Supported brands: VW, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Compatible with: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/Gearbox ECUs without disassembling the shell
Launch X431 XPROG3 Core Functions
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.
Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
XPROG3 Operation Connection:
Connection method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Connection method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Connection method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the immobilizer programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host.
Package List:
Launch X431 X-PROG vs. X-PROG3
| Item | Launch X431 X-PROG | Launch X431 X-PROG3 |
| Read/Write EEPROM | No | Yes |
| Read/Write MCU | No | Yes |
| Mercedes Benz Keys | No | Yes |
| Key simulator | No | Yes |
| VW 4th IMMO Dump Mode All Keys Lost | No | Yes |
| Read engine in Bench mode | No | Yes |
| VW 4th IMMO enumeration all keys lost | No | Yes |
| Read gearbox data | No | Yes |
| Read and write keys | Yes | Yes |
| Read BMW engine ISN code | No | Yes |
| Replace OBD reading component | Yes | Yes |
| Read & Write BMW CAS4+ and FEM chips | No | Yes |
| Read engine in Boot mode | No | Yes |
| Read & Write Audi 5th generation steering column chips | No | Yes |
| Specification | ||
| Interface | DB15 | DB15,DB26 |
| Input Power | DC12V | DC12V |
| Working current Max | 200mA | 500mA |
| Power consumption | 2W | 5W |
| Storage Temperature | -20℃-70℃ | -20℃-70℃ |
| Working Temperature | -10-50 0℃ | 0-50℃ |
| Size | 142 x72 (mm) | 228 x120 (mm) |
何か質問があれば、 お気軽にお知らせください。
Live Support:オンラインチャット
E-Mail:sales@jobdii.jp
Skype:jobdii.jp
ご注意ください：
製品を安全に送るために、電話番号が必要です。ご注文する時、電話番号を教えてください。
また、製品が無事に保証するため、パッケージに署名する前に、損傷があるかどうかを二重にチェックしてください。
もし、商品は損傷があれば、損傷を受けた証拠を開いてください。
Attention: please leave your telephone number for shipping arrival when you make payment for this product on our website.
タグ: 11.11 sales