Emulator SLK-01 - Supports work with DST40 smart keys [Page1 94,D4]. SLK-01 supports emulation/cloning - functionality of the emulator is part of Tango base software.
No additional software, the software is with tango base soft.
Emulator SLK-03 - Supports work with DSTAES smart keys [Page1 88, A8]. SLK-03 supports emulation/cloning/image generation - functionality of the emulator requires activation of SLK-03 additional software.
Emulator SLK-02 - Supports work with DST80 smart keys [Page1 98]. SLK-02 supports emulation/cloning - functionality of the emulator requires activation of SLK-02 additional software.
Xhorse EIS/ELV Test Line for Mercedes Benz
No need to have car for test
Can work together with VVDI BGA MB TOOL
This Benz ECU Test Adaptor is used to brush ECU.
Original Xhorse NEC Key Adaptor works together with VVDI MB BGA
(Without soldering/ Without wire jumper/ Not need other adaptor)
EIS/ELV Test Line for Mercedes
No need to get on car for test
Can work together with VVDI BGA
Long USB Cable for Lexia-3 PP2000 Diagnostic tool for Peugeot and Citroen
Length: 285cm
Xhorse VVDI Prog Bosch ECU Adapter Can Read ISN From BMW ECU N20 N55 B38
Scorpio-LK Emulator SLK-05 with Key Maker Software for Tango Key Programmer.
Emulator SLK-05 - functionality of the emulator requires activation of SLK-04 additional software.
TANGO OBD Cable,works with Tango, can support toyota all key lost.
Emulator SLK-04 can work with DSTAES smart keys [Page1 A9]. SLK-04 supports emulation/cloning/image generation - functionality of the emulator requires activation of SLK-04 additional software.
Orange SKE-LT-DSTAES 128bit for Lonsdor K518SE,the 5th Emulator for Chip 39 H chip-Smart key all lost via OBD-No need connection.
[10月30日までのプロモーション]
EIS/ELV Test Line for Mercedes
No need to have car for test
Can work together with VVDI MB BGA Tool
Main Test Cable For CK-100 Auto Key Programmer
It is PC version of Nissan hand held Pocket PC Consult.
It is used on all NISSAN grey 14pin Digital Data Link (DDL). It is usually located near the fuse box on driver side.
The cars are usually built from year 1989 to 2000. Such as Cefiro, Sentra, Infinity, Maxima,300ZX,Z32, 240SX,S13, S14, Skyline, SR20DE, SR20DET, RB20, Altima, and Fairlady.
Our product communicates with your car just like the factory tool does, and can access all of the systems in the car. OBD2 was created for emissions related problems and only covers a limited subset of your car's engine.
Software version: V3.0.15.0
VVDI Key Tool Adapters is used to renew different kinds of used original remote keys.
Mercedes Benz ECU ME9.7/272-273/ Renew Cable For KTM100 KTAG ECU Programming.After the original ECU data is read out, you can use the Mercedes Benz ECU ME9.7,272,273 renew cable to connect KTM100 or KTAG to write the new ECU data into the new Mercedes ME9.7 ME 9.7 ECU ECM Engine,instead of dismantling the new ECU to write the data.
Most W204 W207 W212 ESL will damage with EIS. In this case, there are two possible reasons and solution:
ESL motor is damaged and need to replace a new motor
NEC chip is locked, theoretically it can be unlock, actually it needs to replace new ESL.
