Function:
Support all MQB48 with NEC35xx chip-Require read encrypt data with VVDIPROG
Support decode immo data, key learn, reset KM, update immo data etc.
Support VDO type, JCI type, and all key lost situation (require synchronize data)
If need to read MQB NEC35XX IMMO data without welding, buy MQB48 solder free adapters.
NEW UPDATE (April 2023)
VVDI Prog adds VAG IMMO4 MQB-LOCK (D70F35xx) read and write
VVDI2 Supports Immo4-NEC35xx dashboard which not support OBD(All key lost and new VDO)- require MQB48-NEC35xx(Lock) license
Vehicle List:
VW: Golf7 CC Magotan T-ROC TAYRON Sagitar Bora Lamando Variant Lavida TiguanL Teramont
Audi: A3 Q2 Q3L
Skoda: Octavia, Kodiaq, Superb, Karoq
Cluster List:
MQB Cluster D70F3532 (A2C81589500)-A
Dash type: 560G920750
MQB cluster D70F3529
dash type 5G1920730B
MQB Cluster D70F3526 (A2C81589700)-C
dash type: 3G0920791B
MQB Cluster D70F3526 (A2C81589700)-B
dash type: 8V0920861
MQB Cluster D70F3526 (A2C81589700)-A
dash type:6C0920740A 6C0920940
MQB Cluster D70F3525 (A2C81589600)-B
dash type: 8V0920861
MQB Cluster D70F3525 (A2C81589600)-A
Dash type:56G920730C
Device affected:
VVDI2 Full+ VVDI Prog (Must have vvdi prog to read immo data).
VVDI Key Tool Plus Full version
VVDI Key Tool Plus VAG Version
if it applies on your vvdi2 only you have to have charged 4-5th and mqb to be able to load MQB2 and in vvdiprog.
Support read immo data for MQB48 type with NEC35xx chip which cannot read by OBD, support add key and all keys lost (need sync data)
Tips:
1. Add key: Use keytool plus , vvdi prog or mini prog to read immo data from dashboard (need remove the dashboard from car), then program key to car with the immo data.
2. For all key lost, program key will need immo data and sync data, it still need get sync data online and program key with both immo data and sync data.
3. There are two ways to read MQB immo data with vvdi prog/key tool plus, one is pin lift method the other is track cut method - might only be for that particular dashboard, probably not all will have track cut method
(Check video column for reference)
4. You must enable function with VVDI Prog + VVDi2 , so VVDi Prog will get possibility to read dump , and VVDI2 can decode ONLY that file was is read over YOUR VVDI Prog serial number.
5. Check VAG NEC35XX locked cluster part number list to see if the wiring diagram matches